EDM Wire Erosion

EDM Wire Erosion uses a metallic wire (electrode) to cut a programmed contour in a workpiece. Extrusion dies and blanking punches are very often machined by wire cutting. In the machining area, each discharge creates a crater in the workpiece (material removal) and an impact on the tool (wear of the tool/electrode). The wire can be inclined, thus making it possible to make parts with taper or with different profiles at the top and bottom. The wire is usually made of brass or stratified copper, and is between 0.02 and 0.33 mm diameter. (GFAC)
Machines
Qty
Agie Charmilles Robofil 640CCS Wire EDM
1
Agie Charmilles Robofil 640CC Wire EDM with automatic wire feed
1
Agie Charmilles Robofil 440CCS Wire EDM with automatic wire feed
1
Agie Charmilles CUT 300 Wire EDM with automatic wire feed
1
Agie Charmilles Robofil 690 Wire EDM with automatic wire feed
1
Agie Charmilles 510 with automatic wire feed
1
Agie Charmilles Robofil 510P
2
Agie Charmilles Robofil 310 Wire EDM with automatic wire feed
1